The Revolutionary Water Softener Alternative Signal induction into the water is the secret to our success.
The Flow-Tech MAX Anti-Scale System is a maintenance-free, eco-friendly, and cost efficient water treatment device that controls lime scale build-up and removes pre-existing lime scale.Using technology derived from years of research and development from a team of chemical engineers and scientists.
Flow-Tech Systems has created the most advanced chemical free water treatment system available today. Now, for the first time, this state-of-the art technology is now available for the residential market.
The Flow-Tech MAX Anti-Scale System is revolutionizing water treatment.
When you order from Western Heating and Air, we guarantee you are getting a high-quality product, with our "Perfect Installation" process. Our technicians will walk you through every step of the process and show you how to operate your new equipment before leaving your home.
** SPECIAL PRICING - SAVE $400 **
$2195 / $1,795
SALT FREE. CHEMICAL FREE. WORRY FREE.
Over 80% of American homes have hard water. Hard water contains dissolved calcium and magnesium. When these minerals enter your home and are subject to pressure and temperature changes, the water becomes super-saturated and encrusting limescale is formed.
Before Flow-Tech Home, home-owners have been forced to use harsh salt and chemicals or unreliable and inconsistent magnetic coil devices.
The trouble with traditional water softeners:
Problems caused by limescale buildup:
How Does Flow-Tech Home Work?
Flow-Tech Home is an environmentally friendly and safe, water softening alternative. When installed on your plumbing system, the Flow-Tech Home system immediately begins to work. The system transmits a low frequency signal that is pulsed several thousand times per second and is propagated throughout your entire plumbing system. This electromagnetic signal reverses the charge on the minerals that are dissolved in the water. This new state forces the minerals to form tiny seed crystals that remain in suspension and are harmlessly washed away with the waste water.
What is Scale?
Scale is formed by minerals in the water- primarily calcium and magnesium – and forms when the water can no longer keep them in solution. It can often be seen on shower heads and faucet aerators. It also forms inside your plumbing, especially inside water heaters and other appliances that use water. It decreases your water pressure and increases your energy usage. It also causes your appliances to fail prematurely.
What is hard water?
Hard water is water with a high concentration of dissolved calcium, magnesium and/or other minerals.
Is hard water bad?
Calcium and Magnesium are beneficial to the human body. Flow-Tech Home keeps these minerals in suspension so that when you drink the water you are able to realize their benefits without having to experience the problems they can cause to your plumbing and appliances if left untreated.
Will the Flow-Tech Home system affect the taste or smell of my water?
No. Flow-Tech Home does not remove or add anything to the water, therefore has no effect on taste or smell.
Will I see spots on my dishes and shower door?
Flow-Tech Home stops scale that is formed by super saturation, however it can’t stop spotting caused by evaporation. If you do experience some light evaporative spotting, the spots will be much easier to remove. This spotting may be reduced or eliminated with the use of Jet Dry, Lemi Shine or a dose of vinegar with each dishwasher load.
Does water conditioned by Flow-Tech Home feel like soft water?
Water conditioned by the Flow-Tech Home system will not cause that slimy or slick feel that is associated with salt softened water, yet the water will feel softer than untreated water. Soaps will lather and create suds at far better than with untreated water.
Will the hardness of my water be different after installing the Flow-Tech Home system?
Flow-Tech Home does not remove minerals from the water, it simply renders them harmless. Initial hardness may even increase as old scale is dissolved and removed from your plumbing system.
What kind of pipes does Flow-Tech Home work on?
Flow-Tech Home works with all kinds of plumbing up to 2 1/2” in diameter. However, if you have non-conductive pipes (PVC or PEX), for proper signal propagation you need to replace a short section (6 inches) with conductive piping to install the unit onto.
Will the Flow-Tech Home system de-scale my plumbing system?
The Flow-Tech Home will dissolve existing encrusted lime scale that is present in your pipes. The rate at which this occurs will vary depending on the make-up of the scale and the amount of water flow in your particular home. During this de-scaling period it may be necessary to clean aerators, faucet screens, shower nozzles, water heater sediment filters and possibly mix valves. It is also recommended that you blow down (drain) your water heater 6 weeks after the installation of the Flow-Tech unit.
How is this system different than the systems that are commonly seen on TV?
Flow-Tech Home is a revolutionary breakthrough in physical water treatment. Due to its proprietary induction method, Flow-Tech Home treats all of the water in your home whether the water is moving or not. Flow-Tech generates a “protection” zone throughout your plumbing system by transmitting its signal throughout the entire system. (This can be demonstrated by your installer). The systems that are commonly seen on TV are flow dependent. This means that the water and the minerals within it must flow past or through their systems in order for these systems to create the temporary seed crystals. It is important to understand that these seed crystals are formed from a charge, and as soon as they leave the installation point they start returning to their original state. This fundamental difference makes the Flow-Tech Home system exponentially superior.